
To start painting, you need to cut off all the corners first
To start painting, you need to cut off all the corners first, and then use the paint roller to paint a larger area. To do this, start at an angle and then trim the paint with a 2 or 3-inch finishing brush. Use longer strokes to blend each stroke smoothly to the next. While keeping the wet edges, only cut as many walls as you can roll. After cutting the area, you can now go back and scroll. To do this, you need to fill the paint tray with wall paint. Charge the paper roll by immersing the paper roll in the paper tray and rolling it up the ramp of the paper tray until the paper roll is full but not oversaturated. Roll paint on the wall, then put the roller into the wet area of the wall you just cut. Roll from top to bottom into small pieces of 1-meter square and apply more paint on top. Roll the paint along the west edge of the wall. Visit Here